Measurement points
Map temperature and humidity sensors to the racks, zones or equipment they represent. Record the normal range and alarm limits for each point.
Connect environmental readings, equipment alarms and operating procedures in one view of the room.
When a sensor crosses its configured threshold, the operator needs to know which room or zone is affected, how quickly the reading changed and which equipment serves that area. A useful alarm includes the sensor location, timestamp and measured value.
Use the site controller to collect field signals and the monitoring software to review live readings and event history. Where the design includes an automatic response, document the output command and how the operator confirms the equipment responded.
Map temperature and humidity sensors to the racks, zones or equipment they represent. Record the normal range and alarm limits for each point.
Identify the person or team responsible for each alarm. Specify the notification channel, escalation path and conditions for clearing the event.
List the fans or other equipment eligible for remote control. Define manual override, the required response on communications loss and any feedback contacts available to verify operation.
Smart Box → collects site measurements and supports configured local control. The Environmental Control Software Suite → gives operators a central view of readings and events.
For projects that call for additional relay outputs, the PARNIK-IP-C8 → is an eight-channel design using Modbus TCP or Modbus RTU. Its engineering development phase is complete. Production release remains pending.
To discuss an installation, share your zone layout, available sensor interfaces, existing monitoring system and alarm-response requirements.